How to Fix Electrical Outlet Problems by Yourself

0
Electrical Outlet Problems

The simple truth is that most electrical jobs should not be fixed by yourself. If you look at the current Electrical Outlet Problems guidelines, you’ll realize that you need a reputable electrician Sydney for almost any electrical issues at home

This is true even if you feel that the issue is easy to resolve: Of course, the regulations may forbid you from working on your own electrics but that doesn’t mean you shouldn’t know how to fix electrical outlet problems. At the very least it will help to ensure your electrician is being fair with you.

Shut Off the Power
Before you do any type of electrical work you should shut off the power supply. This dramatically reduces the likelihood of you being accidentally electrocuted.
You can shut off the master switch, closing power to the entire house. Or, you can turn off the correct circuit breaker. You will need to know which one it is and you should still test the socket to make sure it doesn’t have any power.

Remove the Outlet Cover
The next step is to unscrew the face plate on your socket. This will allow you to see the wires and connections behind it. Keep the screws and faceplate safe in case you need them again.

Inspect the Wires
You can now look at the wires inside the socket. They should be slotted into the terminals properly and the outer protective case should be in good condition. If it isn’t you may be looking at replacing the wiring. This is a more complicated job that must be done by your electrician.

Replace The Outlet
If the cables are fine and connected properly then the issue could simply be the socket. All you have to do is unscrew the clamping screws and pull the cables out of their slots. Slide the cables into the same slots in the replacement outlet. The mechanism is usually on the back of the faceplate, meaning that the box sitting in the wall doesn’t need to be moved.
Once you are sure everything is reconnected properly you can replace the face plate and turn the power back on. This will allow you to test the socket and hopefully find it has been fixed.

Other Potential Issues
Of course, simply replacing the socket is not the answer every single time. If the circuit breaker keeps tripping then you have an issuer with either a faulty circuit breaker or there is an issue with the appliance that has been plugged in. Try disconnecting it and turning the circuit back on. If it doesn’t trip the breaker the appliance has an issue. If the breaker still trips it is likely that the circuit breaker is at fault and this will need to be replaced.
In theory, this is a clip-on/off procedure but, because you are working at the fusebox, you may be better off getting the professionals to handle it for you. Don’t forget that they have the tools and the knowledge to deal with any electrical issue.

LEAVE A REPLY

Please enter your comment!
Please enter your name here